How tall should a swing set be

The U. It should be noted, however, that these guidelines are simply that — Guidelines. Depending on the true type of chain or rope your swing hangs from, there are a couple of ways t make the adjustment.

Keep your ruler or tape measure with you and check as you go, moving until you get to your desired height. Some swings will be tied to an Eyebolt up near the beam. In this case, you can simply untie the rope, pull it tighter by 6 inches, and then re-tie the knot. If you have another type of connection like an adjustable nylon strap or one with eyelets in the strap itself, the adjustments are also pretty straight forward.

For an adjustable strap, you can move it up or down like a belt or a strap on a backpack. With the eyelets, just treat it like the chain and move it up or down one eyelet at a time until you reach your goal. So the one problem you might run into is if you have a swing or swings which have no adjustability. Sometimes they are fixed to the eye-bolts or whatever is being used to attach to the swing beam, and are not adjustable for height. Here are some of the best options available on Amazon , happy shopping!

If your planning on building a swing set, or buying one, you might want to know all the parts you're going to need. Even a grassy lawn quickly will become trampled and hard. The protective surface material should cover an area that extends 6 feet in all directions from stationary equipment such as climbing towers or slides.

Carefully shift the legs of the set to the sides of each marked hole. Then, twist each ground anchor while applying downward pressure to insert it into the soil at each marked position.

Be sure to keep the anchor vertical as you twist it into the ground. Make sure that you insert the anchors into solid ground. First, we recommend selecting an appropriate space for the swing set. The playset plans for the Classic A-Frame specify a finished product that is about 12 feet wide, 8 feet tall and 8 feet deep. It should be installed on fairly level ground, and there should be about six feet of clearance from obstructions.

The fall zone in front and back of the swing should extend out a minimum distance of twice the height of the swing as measured from the ground to the top of the swing support structure.

Use steel mending plates and L-brackets to reinforce weak joints. Place them underneath cross-members, like the top bar and horizontal bars in the A-frame ends of the swing set. Use galvanized hardware and heavy-duty treated deck screws to attach the brackets to ensure the braces will last. Last Updated: 15 days ago — Co-authors : 5 — Users : 5. Save my name, email, and website in this browser for the next time I comment. Notify me of follow-up comments by email. In other words, not only is Redwood easy on the eye but it also comes with a natural resistance to wear and tear, so you can enjoy it just as you purchased it for years to come.

The quality of the Redwood more recently has come into decline. If you are in the market for a Redwood set, make sure you ask your dealer if the Redwood is from new growth or old growth Redwood trees. Also, find out if the Redwood is center cut heartwood Redwood.

If you are dealing with cuts of Redwood from newer growth trees and non-centercut Redwood, the product may be inferior to older type Redwood sets.

This is very important! Make sure your dealer can answer these questions. Premium Preserved Pine - Contrary to popular belief, Premium Preserved Pine playsets, and NOT Redwood, are the most durable of all wood playsets used today because the pine is preshrunk and preserved.

These two processes minimize shrinking, warping, cracking, cupping, and fungal decay. Pine can withstand harsh weather conditions and can hold more moisture than Redwood and Cedar, which gives preserved pine playsets a decades-long lifespan.

One thing to note: Treated woods, such as Premium Preserved Pine tend to be looked down upon by some playset dealers and manufacturers. The short reason for this is that - in the past - treated woods were treated by a chemical with trace amounts of arsenic - CCA - a chemical toxic to humans. Playset manufacturers today that use pressure treated and preserved woods, such as Playnation , however, do NOT use chemicals containing arsenic. The new treatments are copper based, and are Greenguard Certified.

Make sure if you are in the market for a Preserved Pine set that the chemicals used to preserve the wood do not contain arsenic. The deck height is the distance, in feet, from the ground to the base of your playset's main deck. The most common deck heights on swing sets are ft. Some companies make 7-ft mega sets , and most companies have higher end playsets that have two decks - usually one 5-ft deck and one 7-ft deck , or one 6-ft deck and one 8-ft deck.

The higher decks in the cases of the two-decked sets are usually used for a slide or slides. Deck height will determine the size of your deck, the swing arc, the footprint of the set, and ultimately, the cost of your set.

In general, the higher the deck height, the larger the set. The larger the set, the more wood that is used. The more wood that is used, the more costly a set becomes. If you'd like a more in-depth explanation of deck heights, read on. Otherwise you can skip to 3. Generally speaking, there are two main buyers of playsets with a 4 foot deck height: people who have very young children ages who want a playset for only a few years, and people who desperately want a playset but have limited space in their yard.

These sets have smaller deck sizes, smaller swing arcs, and very little room under the main deck. For these reasons, I try to recommend buying a set with at least a 5 foot deck height so that the playset can accommodate your children as they grow older.

Important Note: Many playset dealers will advertise 4-ft deck height playsets to lure customers into a store or for purchase online, as the prices are much lower and the actual size of the set is hard to gauge from a picture.

But beware - customers who buy a set without actually seeing it first complain to us about it being too small as their children age. Some people do not like to spend a lot of money on a swing set and they do what the traditional Koreans and Middle Eastern parents did. They simply tied long ropes to tree limbs or to a simple wood frame.

That frame could extend up to 24 feet or more high. Then the seat is placed very low to the ground which is often made of a simple wood plank. The Korean children and adults still get a lot of fun out of swinging on their traditional swings even though they are not as elaborate as many western models. When it comes to swings, there are a lot of options out there. These swings still provide hours of fun for your children. Or you can go to a variety of designs that contain lots of playground options like ladders and ropes.

More likely, the ideal height for those options would be about 10 feet high. The key to having swing sets work properly is to have enough space so your child can swing without fear of getting injured.

The length of the swing set beam is going to depend on several factors. The most important factor is the number of swings you are going to place on it.